View Trouble - Bentel Security OmniaTAST-R User Manual

Continue: the Panel will arm
View: a list of the zones in alarm status will be shown.
The top row will show the zone label and the bottom row the alarm or bypassed status.
Use the bottom row to bypass/unbypass the zones.
+
Refer Zone status for details on the View and Bypass options.
Auto-bypassable If an Auto-bypassable zone is currently open (alarm status), it will be bypassed automatically when the system
zones arms, and unbypassed when the system disarms.
Bypassed zone If a zone is currently bypassed the following message will be shown:
check
Bypassed zone ↓↵
Bypassed zone
The user will have three options:
Exit: the Panel will not arm
Continue: the Panel will arm
+
If the arming request is confirmed some partitions will have bypassed zones.
View: a list of the zones bypassed status will be shown.
Trouble check If trouble is detected the following message will be shown:
Warn.-Trouble ↵
Warn.-Trouble
The user will have two options:
Exit: the Panel will not arm
Continue: the Panel will arm
+
Refer to View Trouble for viewing instructions.
Memory reset The memory will reset when the partitions arm.
n View Trouble
The amber LED
From standby status:
Press
Use
Press
The Trouble Warnings are as follows.
Ø Warning fuse +B Warning fuse +B : on-board auxiliary power fuse has blown
Ø Warn. fuse BPI1 Warn. fuse BPI1 : BPI fuse has blown
Ø No mains No mains
Ø Low battery Low battery
Ø Warn.pow.troub. Warn.pow.troub. : battery trouble or the battery fuse has blown
Ø Warn.pow.station Warn.pow.station: remote power station trouble (mains failure, fuses, battery down or not working properly)
8
Arm ? Arm ?
Arm ? Arm ?
will go ON to signal Panel trouble.
to view the Trouble (Warning) list.
or to scroll the list.
to exit.
: Mains failure (the Panel is being powered by the battery)
: battery needs recharging
Expandable multifunction control panel Academy40