Installation; Quick Installation Steps - Planet IXT-705AT User Manual

3. Installation

This section describes the functionalities of the Industrial Media
Converter's components and guides you to how to install it on the
desktop. Basic knowledge of networking is assumed. Please read this
chapter completely before continuing.

3.1 Quick Installation Steps

Step 1: Unpack the Industrial Media Converter.
Step 2: Check whether the DIN-rail is screwed on the Industrial
Media Converter. (Please refer to DIN-rail Mounting section
for DIN-rail installation if the DIN-rail is not screwed on
the Industrial Media Converter). If you want to wall-mount
the Industrial Media Converter, then please refer to the
Wall-mount Plate Mounting section for wall-mount plate
installation.
Step 3: To hang the Industrial Media Converter on the DIN-rail track
or wall, please refer to the Mounting Installation section.
Step 4: Power on the Industrial Media Converter. (Please refer to
the Wiring of the Power Inputs section for power input) The
power LED on the Industrial Media Converter will light up.
Please refer to the LED Indicators section for the functions of
LED lights.
Step 5: Prepare
5e/6/6A/7 UTP cable for Ethernet connection.
Step 6: Insert one side of Category 5e/6/6A/7 cable into the
Industrial Media Converter Ethernet port (RJ45 port) while
the other side of Category 5e/6/6A/7 cable into the network
devices' Ethernet port (RJ45 port), e.g., switch, PC or server.
The UTP port (RJ45) LED on the Industrial Media Converter
will light up when the cable is connected with the network
device. Please refer to the LED Indicators section for the
functions of LED lights.
Step 7: When all the connections are all set and LED lights all show
normally, the installation is complete.
12
the twisted-pair, straight-through Category