Optional Log Set - Montigo DL6315 Installation & Maintenance Manual

Optional Log Set

The Fireplace has the option of installing a drift wood log set. Once the base media of fireglass, firestones, or speckled stones has been placed
the log set can be installed. Ensure logs are securely placed and will not tip or fall.
NO LOGS SHOULD LAY ACROSS OR OVER TOP OF THE BURNER FLAME.
Log Kit Installation
Log kits used to create sequence shown: 1 LGS58, 1 LGS59
C
A B
Figure 23. LGS59
STEP 1: Place log E from the LGS59 kit to the left of the pilot, in
the rear left corner of the unit.
E
STEP 2: Place log A resting on log E, with the other end resting
just beside the pilot.
E
A
STEP 3: Log 4 is placed horizontally against the rear of the
firebox.
E
A
38
LGS59
E
D
F
Figure 23.b
Figure 23.c
4
Figure 23.d
3
1 2
Figure 23.e LGS58
STEP 4: Place log D parallel to log 4, at the front edge of the
burner tray.
E
A
STEP 5: In the centre of the firebox, place log 1 laterally in front
of the burner.
D 1
STEP 6: Place log C slightly angled and to the right of log 1, and
agaist the rear of the burner tray.
1
Installation
LGS58
4 5
4
D
Figure 23.f
Figure 23.g
C
Figure 23.h
6
XG0221