Montigo DL6315 Installation & Maintenance Manual page 51

Remote-Flame Control
When you turn on the fireplace it starts on high. The proflame 2
has six (6) flame levels. Each time you press the Down Arrow Key
once the flame height will reduce by one step.
You can continue this until the main burner flame turns off. You
can still operate the accent lights and fans in this mode.
If the main burner flame is off and you press the up arrow key
once, the flame will automatically go to high.
Figure 29.g Flame Off and Flame Level 1.
Figure 29.h Flame Level 5 and Flame Level Maximum
XG0221
Room Thermostat
(Remote Control Operation)
The Remote Control can operate as a room thermostat. The
thermostat can be set to a desired temperature to control
the comfort level in a room. To activate the function, press
the Thermostat Key, see Figure 29i. The LCD display on the
remote control will change to show that the room thermostat
is "On" and the set temperature is now displayed. To adjust the
set temperature press the Up or Down Arrow Keys until the
desired set temperature is displayed on the LCD screen of the
Transmitter.
Figure 29.i Setting Room Thermostat
Smart Thermostat
(Remote Control Operation)
The Smart Thermostat function adjusts the flame height in
accordance to the difference between the set point temperature
and the actual room temperatures. As the room temperature
gets closer to the set point the Smart Function will modulate the
flame down. To activate the function, press the Thermostat Key,
see Figure 29, until the word "SMART" appears to the right of the
temperature bulb graphic, see Figure 29j.
NOTE: When smart Thermostat is activated, manual flame height
adjustment is disabled.
Figure 29.j Smart flame function
Operation
51