Installing Optional Media; Installing Optional Speckled Stones; Installing Optional Driftwood Log Set (Pl42Vo) - Montigo MAHANA PL42VO Installation & Maintenance Manual

Installing Optional Media

Installing Optional Speckled Stones

[RR150SS for PL42VO, RR300SS for PL60VO]
Once the glass door has been removed, place the speckled stones evenly
across the pan and burner see figure 55. Ensure stones do not overlap too
much as this will effect the flame pattern, see Figure 55. DO NOT cover
the pilot with stones, see Figure 56. Ensure numbers are facing down.
Figure 69 Evenly placed speckled stones
Figure 70 Ensure the stones DO NOT cover the pilot.
WARNING:
This appliance is intended for use only with the included
Montigo burners and accessories.
Never install or add any additional or alternative media, rock wool or other
material in this appliance.
The use of additional or alternative materials may pose potential safety
hazards, damage to the appliance, and void manufacturer's warranty.
Page 26

Installing Optional Driftwood Log Set (PL42VO)

[LGS59]
The PL42VO has the option of installing a driftwood log set. Once the
firestones or speckled stones have been installed the log set can be
installed.
Ensure logs are securely placed and will not tip or fall. Remove media
where logs touch the burner tray to ensure a more secure position.
Driftwood logset MUST be installed with Firestone, Fireglass or Speckled
Stone media as a base.
6 5
Figure 71
Step 1. Place Log 2 in the front left corner of the burner tray. Ensure log
does not cover pilot. See Figure 58.
2
Step 2. Place Log 5 to the right of log 2 at the back of the media tray.
Figure 59.
2
Installation
2 3 1 4
LGS59
Figure 72
5
Figure 73
XG0219 - 080421