Port Configuration, Option 217 - Keysight Technologies N5224A Service Manual

Replaceable Parts
Replaceable Parts Listings

2-Port Configuration, Option 217

Bottom Assemblies, 2-Port, Option 217
Reference
Part Number
Designator
A23 N5245-60157
Was N5247-60001
A24
N5240-60062
Was N5240-60045
A25 5087-7765
A27 5087-7323
5087-6323
A29 5087-7760
A32
A33 5087-7793
A36
A37 5087-7759
A38 33325-60016
A41
A46 33325-60017
A49
➀
N5240-60058
a. Part numbers in italic typeface are for rebuilt exchange assemblies. Refer to
page 6-4.
b. All new units built after August 2009, no longer use the N5242-60031 cable that was attached to connector
P1001 and Source 2. As a result of this change, the IF multiplexer boards have had their P1001 connectors
removed. If your instrument contains a N5242-60031 cable, remove it from your instrument.
6-40
Qty Description
a
1 Test set motherboard
1 IF multiplexer board
b
1 LO Multiplier/amplifier 26.5 (HMA26.5)
1 Mixer brick
2 Test port 1 receiver coupler
Test port 2 receiver coupler
2 Test port 1 coupler
Test port 2 coupler
1 Reference mixer switch
2 Test port 1 source attenuator
Test port 2 source attenuator
2 Port 1 receiver attenuator
Port 2 receiver attenuator
2 Front panel LED board
"Rebuilt-Exchange Assemblies" on
Keysight N5224A/25A Service Guide