Tests and Adjustments
Information in This Chapter
Section Title
About System
Verification and
Performance Tests
ANSI/NCSL Z540.3–
2006 and ISO/IEC
17025 Verification
Non-Standards
Compliant Verification
Preliminary Checks
System Verification
a
Performance Tests
3-2
Summary of Content
Descriptions of:
—
System Specifications
—
Instrument Specifications
—
System Verification Procedure
—
Performance Tests
—
Certificate of Calibration
The ANSI/NCSL Z540.3–2006 and ISO/IEC 17025 process of verifying
your analyzer.
The Non-Standards Compliant process of verifying your analyzer.
Performing the operator's check.
Checking your test cables.
Perform these checks before performing system
verification.
What the system verification does.
How to perform the verification test.
How to interpret the results.
A brief summary of each performance test:
—
Source Maximum Power Output Test
—
Source Power Linearity Test
—
Frequency Accuracy Test
—
Trace Noise Test
—
Receiver Compression Test
—
Noise Floor Test
—
Calibration Coefficients Test
—
Dynamic Accuracy Test
Keysight N5224A/25A Service Guide
Start Page
page 3-7
page 3-10
page 3-11
page 3-12
page 3-21
page 3-31