Restoring Using The Lcd Panel - Check Point 4200 Getting Started Manual

The appliance initializes and status messages are shown in the terminal emulation
program.
8. When this message is shown, you have approximately four seconds to hit any key to
activate the Boot menu.
9. From the Boot menu, select the relevant Reset to factory defaults image.
10. Press Enter.

Restoring Using the LCD Panel

To restore the appliance using the LCD Panel keys:
1. Reboot or turn on the appliance.
2. When the countdown begins, press any of the arrow keys.
The Boot menu appears.
3. Using the arrow buttons, scroll to the relevant default factory image.
4. Press .
5. Confirm the reset by pressing .
Check Point 4000 Appliances Getting Started Guide
Restoring Factory Defaults
| 37