Safety, Environmental, And Electronic Emissions Notices - Check Point 4200 Getting Started Manual

Safety, Environmental, and
Electronic Emissions Notices
Read the following warnings before setting up or using the appliance.
Warning - Do not block air vents. A minimum 1/2-inch clearance is required.
Warning - This appliance does not contain any user-serviceable parts. Do not
remove any covers or attempt to gain access to the inside of the product.
Opening the device or modifying it in any way has the risk of personal injury and
will void your warranty. The following instructions are for trained service
personnel only.
Before you install or remove a chassis, or work near power supplies, turn off the power and
unplug the power cord.
To prevent damage to any system board, it is important to handle it with care. The following
measures are generally sufficient to protect your equipment from static electricity discharge:
• When handling the board, use a grounded wrist strap designed for static discharge
elimination.
• Touch a grounded metal object before removing the board from the antistatic bag.
• Handle the board by its edges only. Do not touch its components, peripheral chips, memory
modules or gold contacts.
• When handling processor chips or memory modules, avoid touching their pins or gold edge
fingers.
• Restore the communications appliance system board and peripherals back into the
antistatic bag when they are not in use or not installed in the chassis. Some circuitry on the
system board can continue operating even though the power is switched off.
• Under no circumstances should the lithium battery cell used to power the real-time clock be
allowed to short. The battery cell may heat up under these conditions and present a burn
hazard.
Warning - DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH SAME OR EQUIVALENT TYPE
RECOMMENDED BY THE MANUFACTURER. DISCARD USED BATTERIES
ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS.

Safety, Environmental, and Electronic Emissions Notices

Check Point 4000 Appliances Getting Started Guide | 5