Configuration Options - Check Point 4200 Getting Started Manual

You can change the interface in the WebUI, after you complete the First Time Configuration
Wizard.
2. Open a connection from a browser to the management IP address.
The login page opens.
3. Log in to the system with the default username and password: admin and admin
4. Click Login.
The First Time Configuration Wizard runs.
5. Follow the instructions on the screen.
Note - Settings that you configure in the First Time Configuration Wizard, can be
changed later in the WebUI, from an Internet browser go to
https://<appliance_ip_address>
To start the First Time Configuration Wizard on SecurePlatform:
1. Connect a standard network cable to the appliance's management interface and to your
management network.
The management interface is marked MGMT.
2. Open Internet Explorer to the default management IP address,
https://192.168.1.1:4434
Note - Pop-ups must always be allowed on https://<appliance_ip_address>
The login page opens.
3. Log in to the system using the default login name/password: admin/admin and click
Login.
Note - The features configured in the wizard are accessible after completing the
wizard via the WebUI menu. Go to https://<appliance_ip_address>:4434
to open the WebUI.
4. Change the administrator password, as prompted. The default password gives you access
to the appliance. For security, you must change it to a more secure password.
5. In the Password recovery login token section, download a Login Token to use if you forget
the password. We recommend that you save the password recovery login token file in a
safe location.
The First Time Configuration Wizard runs.
6. Follow the instructions on the screen.

Configuration Options

There are different First Time Configuration Wizard options for the Gaia and the
SecurePlatform operating systems. See the Installation and Upgrade Guide related to the
software version. Search for the guide with the applicable software version in the Support
Center documentation section
Check Point 4000 Appliances Getting Started Guide
Configuring 4000 Appliances
| 25