Vega VEGASCAN 693 Operating Instructions Manual page 33

Connection of the PC via
Ethernet
VEGASCAN 693 - 15-channel HART signal conditioning instrument
3
Fig. 8: Connection of the modem via RS232
1 Analogue, ISDN or GSM modem with RS232 interface
2 RS232 modem connection cable (in the scope of delivery)
3 RS232 interface of VEGASCAN 693
4 VEGASCAN 693
With the Ethernet interface, VEGASCAN 693 can be con-
nected directly to an existing PC network. Any standard patch
cable can be used. When connecting a VEGASCAN 693
directly to the PC, a cross-over cable must be used. To reduce
EMC interference, you should mount the supplied ferrite bead
on the Ethernet connection cable. Each VEGASCAN 693 then
gets its own IP address under which it can be accessed from
anywhere in the network. The parameter adjustment of the
instrument via PACTware™ can be carried out from any PC.
The measured values can be made available to individual
users within the company network as HTML chart. Alterna-
tively, independent, time or event-controlled transmission of
measured values via e-mail is also possible.
In case of more comprehensive requirements, it is recom-
mended to use the "Visual VEGA" software for measured value
enquiry, processing and visualisation.
Setup with PACTware™
4
2
1
33