Vega VEGASCAN 693 Operating Instructions Manual page 22

Setup with the integrated indicating and adjustment unit
Meas. loop - Scaling
Meas. loop - Meas. loop TAG
Display
22
volume. By activating the appropriate curve, the volume
percentage of the vessel is displayed correctly. If the volume
should not be displayed in percent but e.g. in l or kg, a scaling
can be also set.
Linearization curve 1
▼
linear
à
Enter the requested parameter via the appropriate keys
and save your settings with [OK].
Scaling means the conversion of the measured value into a
certain parameter and unit. The indication can then show e.g.
instead of the percentage value, the volume in l. Indication
values of max. -99999 to +99999 are possible.
Scaling: Unit 1
▼
Mass
▼
kg
à
Enter the requested parameter via the appropriate keys
and save your settings with [OK].
In this menu item you can enter an unambiguous designation
for each measurement loop, e.g. the measurement loop name
or the tank or product designation. In digital systems and in the
documentation of larger plants, a unique designation should be
entered for exact identification of individual measuring sites.
Meas. loop TAG 1
TAG-No. 1
à
Enter the requested parameter via the appropriate keys
and save your settings with [OK].
In the menu item "Display", you can set the requested
displayed value for the measurement loop.
VEGASCAN 693 - 15-channel HART signal conditioning instrument