Vega VEGASCAN 693 Operating Instructions Manual page 20

Setup with the integrated indicating and adjustment unit
Meas. loop - Parameter
Meas. loop - Adjustment
20
Input 1
VEGAPULS (addr. 1)
Distance
Change input?
Via the parameter you inform VEGASCAN 693 of the type of
measurement. The following options are available:
Level
l
Process pressure (only with VEGABAR, VEGAWELL, D-
l
series)
Temperature (only with VEGABAR, VEGAWELL)
l
Universal (for sensors of other manufacturers)
l
Parameter
▼
Level
Information:
Keep in mind that some settings must be carried out
individually several times, because they are specifically
required for each measurement loop. This applies e.g. to the
single measurement loops, the displayed values in the display
as well as the outputs.
The unit of measurement must be selected before starting the
adjustment. Depending on the connected instrument this can
be e.g. m(d), ft(d), bar, psi, °C or %.
Units of measurement 1
▼
m(d)
The following illustrations and examples relate to the min./max.
adjustment of a radar sensor.
Min. adjustment 1
0.00 %
≙
32.00 m(d)
9.245 m(d)
VEGASCAN 693 - 15-channel HART signal conditioning instrument