Assembly Replacement
Front Panel
Replacement Procedure
1. Reverse the order of the removal procedure.
2. Torque all T–10 screws to 9 in–lbs.
3. Torque all T–15 screws to 21 in–lbs.
4. Perform the post–repair adjustments and performance tests that pertain
to this removal procedure.
1
Figure 3-3
Front Panel Removal with serial prefixes < US/MY5XXX3XXX
1. Applicable if the A2 does not have the most current LCD.
264
E8257D/67D, E8663D PSG Signal Generators Service Guide