Keysight Technologies E8257D Service Manual page 185

Replaceable Parts
Assemblies
Table 2-3
Assembly
B1 Fan
RF Output Connector (1.85 mm)
(Option 567)
RF Output Connector (2.4 mm)
(Options 532, 540, 544, and 550)
RF Output Connector (3.5 mm)
(Options 513 and 520)
RF Output Connector (Type–N)
(E8663D and Option 520)
a. Requires firmware version C.06.00 or greater.
b. Requires firmware version C.06.17.
- Send SERV:REPL:FRAC command if E8251-60647 rev. is A0100 or A0101.
c. Requires firmware version C.04.17 or greater.
d. Requires firmware version C.04.53 or greater.
e. Requires the temperature compensation resistor pack on A25B to be installed.
f. Requires firmware version C.05.31 or greater.
E8257D/67D, E8663D PSG Signal Generators Service Guide
E8257D and E8663D
Part Number Page Number
3160–4121 2-198,
2-199,
2-200, and
2-206
5065–9852 2-240
5063–1700 2-241
08673-60040 2-242
1250-3968
E8267D
Part Number Page Number
3160–4121 2-201,
2-202, and
2-207
N/A
5063-1700 2-241
08673–60040 2-242
08559–60002 2-243
195