Keysight Technologies E8257D Installation Note
Psg signal generators, removable flash memory, option 008/009 upgrade kit
Hide thumbs
Also See for E8257D:
- Service manual (417 pages) ,
- User manual (22 pages) ,
- Installation note (18 pages)
Advertisement
Quick Links
Keysight E8257D/57N/67D and E8663D
PSG Signal Generators
Removable Flash Memory
Option 008/009 Upgrade Kit
Notice: This document contains references to Agilent.
Please note that Agilent's Test and Measurement busi-
ness has become Keysight Technologies. For more in-
formation, go to www.keysight.com.
Installation Note
Part Number E8251-90371
Printed in USA August 2014
Advertisement
Related Manuals for Keysight Technologies E8257D
Summary of Contents for Keysight Technologies E8257D
- Page 1 Removable Flash Memory Option 008/009 Upgrade Kit Notice: This document contains references to Agilent. Please note that Agilent’s Test and Measurement busi- ness has become Keysight Technologies. For more in- formation, go to www.keysight.com. Installation Note Part Number E8251-90371 Printed in USA August 2014...
- Page 2 The information contained in this document is subject to change without notice. Keysight Technologies makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Keysight Technologies shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
-
Page 3: Tools Required
None required Introduction This upgrade kit adds Option 008, Removable Flash Memory, to the E8257D/57N and E8663D PSG Signal Generators, or Option 009, Removable Flash Memory, to the E8267D Vector Signal Generator. This upgrade kit can only be used in signal generators with prefixes as listed above. - Page 4 Install the Flash Memory Card 1. Using a straight slot screw driver, loosen the latch screw and open the “Removable Compact Flash” door located on the rear panel.
- Page 5 2. Install the IC flash memory card provided with the upgrade kit. 3. Close the door and tighten the latch screw. Activate Option 008/009 1. Follow the instructions printed on the Entitlement Certificate. Verify Installation and Activation 1. Cycle instrument power if you have not done so after entering the license key. 2.