Specifications - Yaesu FTM-7250DR Operating Manual

Vhf/uhf digital/analog transceiver c4fm/fm
Hide thumbs Also See for FTM-7250DR:
Table of Contents

Advertisement

General
Frequency Range:
Channel Step:
Standard Repeater Shift:
Frequency Stability:
Modes of Emission:
Antenna Impedance:
Supply voltage:
Current Consumption (typical): Rx: less than 0.5 A
Operating Temperature Range: -4° F to +140° F (-20° C to +60° C)
Case Size (WxHxD) (approx.): 6.1" x 1.7" x 5.7" (155 x 42 x 145.5 mm)
Weight (approx.):
Transmitter
Output Power:
Modulation Type:
Maximum Deviation:
Spurious Radiation:
Microphone Impedance:
Receiver
Circuit Type:
Ifs:
Sensitivity (for 12dB SINAD):
Sensitivity (for Digital):
Selectivity (-6/-60dB):
Maximum AF Output:
Specifications are subject to change without notice, and are guaranteed within the 144
and 430 MHz amateur bands only. Frequency ranges will vary according to transceiver
version; check with your dealer.
Tx 144 - 146 or 144 - 148 MHz
430 - 440 or 430 - 450 MHz
Rx 108 - 579.995 MHz
5/6.25/(8.33)/10/12.5/15/20/25/50/100 kHz ( ) Air Band
VHF: ± 600 kHz
UHF: ± 5 / 1.6 / 7.6 MHz
±2.5 ppm [ -4 °F to +140 °F (-20 °C to +60 °C) ]
F2D/F3E/F7W
50 Ohms, unbalanced
13.8 V DC ±15%, negative ground
Tx: 10 A (50 W) /6 A (25 W) /4 A (5 W)
(w/o knobs and FAN)
2.86 lb (1.3 kg)
50/25/5 W
F2D/F3E: Variable Reactance
F7W: 4FSK (C4FM)
±5 kHz (Wide)
±2.5 kHz (Narrow)
Better than -60 dB
2k Ohms
Double Conversion Superheterodyne
1st 47.25 MHz, 2nd 450 kHz
1.5 μV typ for 10 dB SN (108 - 137 MHz, AM)
0.16 μV for 12 dB SINAD (137 - 174 MHz, NFM)
1 μV for 12 dB SINAD (174 - 222 MHz, NFM)
0.5 μV for 12 dB SINAD (300 - 350 MHz, NFM)
0.2 μV for 12 dB SINAD (350 - 400 MHz, NFM)
0.18 μV for 12 dB SINAD (400 - 470 MHz, NFM)
0.35 μV for 12 dB SINAD (470 - 580 MHz, NFM)
0.19 μV typ for BER 1 %
12 kHz/28 kHz
3 W into 4 Ohms with 10% THD

Specifications

43

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ftm-7250de

Table of Contents