Lcd Display - Yaesu FTM-7250DR Operating Manual

[ BAND ( SQL )] key

A brief press of this key moves operation to the next-highest frequency band.
Press and hold in this key to adjusted the squelch level.
[ GM ( AMS )] key

Pressing this key to activate the GM (Group Monitor) function.
Press and hold this key to display the transmit mode setting when using the AMS
function.
[ MODE ( DG-ID )] key

Briefly pressing each time switches the operating band communication mode.
Press and hold in this key to select the DG-ID number registered in the DG-ID memory.
Note: For details, see "Recall and use the DG-ID number registered in the DG-ID
memory" on 20.
[ MHz ( SETUP )] key

This key allows tuning in 1 MHz steps (the MHz digits will blink on the display).
Press and hold this key to activate the Setup (Menu) Mode.
[ V/M ( MW )] key

Pressing this key briefly, switches between VFO mode, memory mode, and HOME
channel.
Press and hold the key to display the memory registration screen.
 Power/Lock key
Press and hold in this key to switch the power between ON and OFF. Briefly pressing
the key while the transceiver is turned ON engages or releases the key lock.
Speaker
The internal speaker is located here.

LCD Display

The main digits on the display may show the operating frequency, memory name, or
any of many parameters during Menu setup.
(Continuous Tone Coded Squelch System)
Repeater Shift Direction
GM Feature Active
Frequency/Message
Area
LOW/MID TX Power Selected
CTCSS/DCS/EPCS Bell Paging
DCS (Digital Code Squelch)
CTCSS
Narrow Deviation
S and TX Power Meter
Front Panel Controls & Switches
Lock Feature Active
AMS Function
Communication mode
DTMF Memory Mode
SKIP/Preferential Scan Channel
HOME Channel
Memory mode
Memory Channel Number
GM Feature Communica-
tion range indicator
9