Register The Transceivers - Yaesu FTM-7250DR Operating Manual

Advanced Operation

Register the transceivers

1. Press and hold the [ MHz ( SETUP )] key to enter the
Setup Menu.
2. Rotate DIAL knob to select "DPID LST 15".
3. Press the [ MHz ( SETUP )] key.
The DP-ID List is displayed.
4. While the DP-ID list is displayed, a
transmission in the digital C4FM mode
from the other transceiver will register
the DP-ID.
When a signal from the other station
is received, the call sign is displayed
on the LCD.
Notes:
• When a signal from the already registered transceiver is received, the display of DP-
ID list does not change.
• When registering a transceiver already registered with a different call sign, the call
sign registered in the DP-ID list is changed to registrar the new call sign.
5. Press and hold the [ MODE ( DG-ID )] key to save
the setting.
• When registering in the DP-ID list is finished,
"COMPLETE" is displayed, then the display re-
turns to the DP-ID list screen.
• To continue operating without registering the
DP-ID, press the [ MODE ( DG-ID )] key.
• If registering several DP-IDs, repeat steps 4 to
5.
• A maximum of 24 stations may be registered.
6. Press and hold the [ MHz ( SETUP )] key to return to normal operation.
Register the DP-ID of all the transceivers in the group to another transceiver using the
same operation.
Notes:
• Once the DP-ID is registered, the DP-ID is stored until the DG-ID is deleted.
• Register with the another transceiver while each other's transceivers are nearby.
22