Register the DG-ID number in the DG-ID memory
Example:
Enter the transmit DG-ID number "50" and the receive DG-ID number "00"
into the DG-ID memory "01"
1. Press and hold the [ P2 ] key on the microphone.
The DG-ID memory number at the bottom right of
the screen blinks.
2. Rotate the DIAL knob or press the [ UP ] / [ DWN ]
key on the microphone to select the DG-ID mem-
ory number to be stored to the "01" register.
3. Press the [ P2 ] key on the microphone.
The transmit DG-ID number "T00" blinks.
4. Rotate the DIAL knob or press the [ UP ] / [ DWN ]
key on the microphone to set the transmit DG-ID
number to "T50".
5. Press the [ P2 ] key on the microphone.
The transmit DG-ID number blinks.
6. Rotate the DIAL knob or press the [ UP ] / [ DWN ]
key on the microphone to set the receive DG-ID
to "R00".
7. Press the [ P2 ] key on the microphone.
• The input screen of the DG-ID tag is displayed.
• Use the numeric keys on the microphone or the DIAL knob to input the characters of
the DG-ID tag. Up to 8 characters can be entered.
Press the [ P3 ] key on the microphone or [ BAND ( SQL )] key to move the cursor to
the left.
Press the [ P4 ] key on the microphone or [ V/M ( MW )] key to move the cursor to the
right.
8. Press and hold the [ P2 ] key on the microphone to save the setting and return to normal
operation.
Notes:
• The DG-ID memory "00" is fixed at "T00 R00" and cannot be changed.
• By pressing and holding the [ P2 ] key on the microphone in the middle of the setting,
the setting so far will write and then return to the normal screen.
• When the [ P2 ] key on the microphone is not pressed while writing, after five seconds
elapse the operation will return to the normal screen without saving the setting.
Advanced Operation
19