Reset Procedure/Clone; Reset Procedure; Microprocessor Resetting; Setup (Menu) Mode Resetting - Yaesu FTM-7250DR Operating Manual

Reset Procedure/Clone

Reset Procedure

In some instances of erratic or unpredictable operation, the cause may be corruption of
data in the microprocessor (due to static electricity, etc.). If this happens, resetting the
microprocessor may restore normal operation. Note that all memories will be erased if
you do a complete microprocessor reset, as described below.

Microprocessor Resetting

To clear all memories and other settings to factory defaults:
1. Turn the radio OFF.
2. Press and hold the [ MODE ( DG-ID )] , [ MHz ( SETUP )] , and [ V/M ( MW )] keys while turning
the radio on. The "ALL RESET PUSH V/M KEY" notation will scroll on the display.
3. Press the [ V/M ( MW )] key momentarily to reset all settings to their factory defaults
(press any other key to cancel the Reset procedure).

Setup (Menu) Mode Resetting

To reset the Setup (Menu) Mode settings to their factory defaults, while leaving other
settings unchanged:
1. Turn the radio OFF.
2. Press and hold the [ MODE ( DG-ID )] and [ MHz ( SETUP )] keys while turning the radio
on. The "SET MODE RESET PUSH V/M KEY" notation will scroll on the display.
3. Press the [ V/M ( MW )] key momentarily to reset the Setup (Menu) Mode settings to their
factory defaults (press any other key to cancel the Reset procedure).

Clone

The FTM-7250DR includes a convenient "Clone" feature, which allows the memory and
configuration data from one transceiver to be transferred to another FTM-7250DR.
This can be particularly useful when configuring a number of transceivers for a public
service operation.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).
32