Setup (Menu) Mode - Yaesu FTM-7250DR Operating Manual

The FTM-7250DR Setup (Menu) mode, already described in parts of many previous
chapters, is easy to activate and setup. The Menus may be used to configure many
of transceiver parameters, some of which have not been detailed previously. Use the
following procedure to activate the Setup (Menu) mode:
1. Press and hold the [ MHz ( SETUP )]
key to enter the Setup menu.
2. Rotate the DIAL knob to select the
Menu Item to be adjusted.
3. Press the [ MHz ( SETUP )] key mo-
mentarily to enable adjustment of
the selected Menu item, and then
rotate the DIAL knob to perform the
actual adjustment.
4. After completing the selection and adjustment, press and hold the [ MHz ( SETUP )] key
to exit the Setup menu and resume normal operation.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).
Menu Item
Enables/Disables the Automatic Power
APO
1
Off feature.
Enables/Disables the Busy Channel
BCLO
2
Lock-Out feature.
BEP KEY
3 Enables/Disables the key beeper.
Enables/Disable the Band-edge beeper
BEP EDGE
4
while scanning.
BEP LVL
5 Sets the beep level
BEP STBY
6 Enables/Disable the Standby beep
Selects the CTCSS/DCS/EPCS Bell
BELL
7
Ringer repetitions.
CLK TYPE
8 Shifting of the CPU clock frequency.
DC VOLT
9 Indicates the DC Supply Voltage.
DCS CODE
10 Setting of the DCS code.
Select a combination of DCS inversion
DCS INV
11 codes in terms of communication direc-
tion.
DIG AMS
12 Sets the transmission mode
DIG VW
13 Turn the VW mode selection ON or OFF.
DI POPUP
14 Sets the information pop-up time
DPID LST
15 DP-ID list (Display/Register/Clear)
Enables/Disables the DTMF Autodialer
DT AUTO
16
feature.
Function

Setup (Menu) Mode

Available Values
0.5H to 12H (0.5H step)/
OFF
ON/OFF
KEY+SCAN/KEY/OFF
ON/OFF
HIGH/LOW
ON/OFF
1 to 20/CONTINUE/OFF
A/B
---
104 standard DCS codes
NORMAL/INVERT/
BOTH
TXMANUAL/TX FMFIX/
TX DIGTL/AUTO
ON/OFF
2 / 4 / 6 / 8 / 1 0 / 2 0 / 3 0 / 6 0 /
CONTINUE/OFF
(Registered DP-ID)
MANUAL/AUTO
Default
OFF
OFF
KEY+SCAN
OFF
HIGH
ON
OFF
A
---
023
NORMAL
AUTO
OFF
10 SEC
---
MANUAL
39