Digital Personal Id (Dp-Id) Feature; Registering The Dp-Id To A Dr-2X Digital Repeater; Register The Transceivers - Yaesu FTM-3200DR Operating Manual

Digital Personal ID (DP-ID) feature

Every C4FM digital transmit communication contains the individual ID information (Radio
ID) of each transceiver. The DP-ID function uses this individual ID information.
When communicating with another transceiver, if the DP-ID of the stations are registered
in each other's transceivers, they can communicate even if the DG-ID numbers are
different.

Registering the DP-ID to a DR-2X digital repeater

Note:
To register the transceiver DP-ID in the System Fusion II, DR-2X C4FM digital repeater, refer to
the instruction manual of the DR-2X.
By registering the transceiver's DP-ID in the DR-2X, you can remotely control the settings
and functions of DR-2X. Remote control cannot be performed from a transceiver that
does not register the DP-ID, so it is possible to securely manage repeaters.
DR-2X Remote Control Feature
• Activate the repeater operation
• Deactivate the repeater operation
• Set the repeater to C4FM mode
• Set the transmit power
• Voice Message Control (Rec / Play / Stop)
• Set the Emergency Call

Register the transceivers

1. Press and hold the [MHz(SETUP)] key to
enter the Set-up Menu.
2. Rotate DIAL knob to select "DPID LST 13".
3. Press the [MHz(SETUP)] key.
The DP-ID List is displayed.
4. While the DP-ID list is displayed, a
transmission in the digital C4FM mode
from the other transceiver will register the
DP-ID.
When a signal from the other station is
received, the call sign is displayed on the LCD.
Notes:
z When a signal from the already registered transceiver is received, the display of DP-ID list does
not change.
z When registering a transceiver already registered with a different call sign, the call sign registered
in the DP-ID list is changed to registrar the new call sign.
FTM-3200DR/DE Operating Manual
Advanced Operation
25