Bleeding The Hydraulic Clutch Circuit - Zetor PROXIMA PLUS 8541 Operator's Manual

BLEEDING THE HYDRAULIC CLUTCH
CIRCUIT
Bleed the clutch hydraulic circuit in the
same way as the rear brake system. The
bleeder screw of the clutch release hy-
draulic circuit is located on the clutch
release control cylinder (1).
Add only fresh brake fluid into the
brake fluid equalizing tank, which
is common both for the brake and
clutch circuits.
After each two years of operation it is
necessary to change the brake fluid in
the entire brake circuit including the
clutch release hydraulic circuit.
ADJUSTMENT
E765
195