UPPER TIE-ROD
The upper tie-rod (1) is length adjust-
able. This is attached to the tractor into
one of four openings of the bracket that
transmits the force from the attached
implement to the torque bar located in
cover of the hydraulic control mecha-
nism.
During transportation of the im-
plement it is necessary to dis-
place the upper tie-rod into open-
ing "d" to avoid the overloading of
kinematics of the lifting hydraulic
system or downfall of the at-
tached implement.
HITCHES
E456
UPPER TIE-ROD
Pay attention to keep the same
length of joints being screwed out
from the rod tube when elongat-
ing the upper tie-rod.
110
E457
SELECTION OF OPENINGS IN THE
BRACKET
Attachment of the upper tie-rod into one
of openings "a" though "d" of the bracket
influences the following:
- sensitivity of hydraulic response (con-
trol position selection lever in position
"D" or "M"). The biggest response sen-
sitivity is with the tie-rod being at-
tached to the opening "a".
E458