7 COMMANDS AND TARGETS
•
How often the test is performed: Event driven. The test is performed when a device programmed to receive GOOSE
messages stops receiving. This can be from 1 to 60 seconds, depending on GOOSE packets.
•
What to do: Check GOOSE setup.
UNEXPECTED RESTART:
Press "RESET" key
•
Latched target message: Yes.
•
Description of problem: Abnormal restart from modules being removed or inserted while the C30 is powered-up, when
there is an abnormal DC supply, or as a result of internal relay failure.
•
How often the test is performed: Event driven.
•
What to do: Contact the factory.
GE Multilin
C30 Controller System
7.2 TARGETS
7
7-7