GE C30 Instruction Manual page 137

5 SETTINGS
g) IEC 61850 PROTOCOL
PATH: SETTINGS PRODUCT SETUP
IEC 61850 PROTOCOL
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
The C30 Controller System is provided with optional IEC 61850 communications capability. This feature is
specified as a software option at the time of ordering. Refer to the Ordering section of chapter 2 for addi-
tional details. The IEC 61850 protocol features are not available if CPU type E is ordered.
The C30 supports the Manufacturing Message Specification (MMS) protocol as specified by IEC 61850. MMS is supported
over two protocol stacks: TCP/IP over ethernet and TP4/CLNP (OSI) over ethernet. The C30 operates as an IEC 61850
server. The Remote inputs and outputs section in this chapter describe the peer-to-peer GSSE/GOOSE message scheme.
The GSSE/GOOSE configuration main menu is divided into two areas: transmission and reception.
PATH: SETTINGS PRODUCT SETUP
GSSE / GOOSE
CONFIGURATION
MESSAGE
The main transmission menu is shown below:
GE Multilin
COMMUNICATIONS IEC 61850 PROTOCOL
GSSE / GOOSE
CONFIGURATION
SERVER
CONFIGURATION
IEC 61850 LOGICAL
NODE NAME PREFIXES
MMXU DEADBANDS
GGIO1 STATUS
CONFIGURATION
GGIO2 CONTROL
CONFIGURATION
GGIO4 ANALOG
CONFIGURATION
REPORT CONTROL
CONFIGURATION
XCBR
CONFIGURATION
XSWI
CONFIGURATION
COMMUNICATIONS IEC 61850 PROTOCOL
TRANSMISSION
RECEPTION
C30 Controller System
5.2 PRODUCT SETUP
GSSE/GOOSE CONFIGURATION
5
5-17