Memory Locations And Markers - DigiDesign Control 24 Reference Manual

Memory Locations and
Markers
Control 24 supports all Pro Tools Memory Loca-
tions and Markers features.
To display the Memory Locations window:
Press MEM LOC in the WINDOW section.
Creating and Defining Memory
Locations
To define a memory location:
Press ENTER. The New Memory Location win-
1
dow appears.
Set properties for your marker/memory loca-
2
tion with the numeric keypad or alpha-numeric
keyboard.
Press ENTER to save the new memory loca-
3
tion.
82 Control 24 Reference Guide
To define a memory location to a specific
numerical address:
Enter a decimal, a number key (or keys), then
press ENTER.
If available, a memory location will be assigned
to that number/address.
To recall a memory location:
Enter a decimal, then a number, then a deci-
mal.
– or –
Click on the desired memory location button
in the Memory Locations window.
To delete a memory location
Click a memory location in the Memory Loca-
tions window, while pressing OPT(ALT)/ALL.
To delete all memory locations:
Click any memory location in the Memory Lo-
cations window, while pressing
OPT(ALT)/ALL+SHIFT/ADD. This can be un-
done with UNDO.
To edit a memory location:
Double-Click the location in the Memory Lo-
cations window. This enables you change set-
tings for the memory location as well as "move"
the marker/memory location from its original
location to the current playback/insertion
point.