Memory Location View - DigiDesign C24 Manual

To edit a Window Configuration:
In Window Configuration view, hold the
Ctrl/Win modifier switch and press the encoder
switch that corresponds to the Window Config-
uration name in the LCD display.
To create a new Window Configuration:
In Window Configuration view, hold the
Ctrl/Win modifier switch and press an encoder
switch that corresponds to a blank area of the
LCD display.
To exit WIndow Configuration view:
Hold the Command/Ctrl Modifier switch and
press the flashing Window Configuration
switch.

Memory Location View

C|24 lets you open and close the Memory Loca-
tions window and display and select Memory
Locations from the control surface.
In Memory Location view, Memory Location
names are shown in the bottom row of the LCD
displays.
If there are more Memory Locations than can be
shown at once on the LCD displays. the Chan-
nel Bar Scroll switch flashes.
To toggle display of the Memory Locations window
on-screen:
Press the Memory Location (Mem Loc) switch.
To toggle display of Memory Locations in the LCD
displays:
In Home view, hold the Command/Ctrl Mod-
ifier switch and press the Memory Location
switch.
To recall a Memory Location:
In Memory Location view, press the encoder
switch that corresponds to the location name in
the LCD display.
To edit a Memory Location:
In Memory Location view, hold the Ctrl/Win
modifier switch and press the encoder switch
that corresponds to the location name in the
LCD display.
To create a new Memory Location, do one of the
following:
In Memory Location view, hold the Ctrl/Win
modifier swtich and press an encoder switch
that corresponds to a blank area of the LCD dis-
play.
– or –
In any view, press the Enter switch in the
File/Utility section.
To exit Memory Location view:
Hold the Command/Ctrl Modifier switch and
press the flashing Memory Location switch.
Chapter 8: Operating Views and Modes 85