DigiDesign Control 24 Reference Manual page 2

Copyright
This User's Guide is copyrighted ©2001 by Digidesign, a
division of Avid Technology, Inc. (hereafter "Digidesign"), with
all rights reserved. Under copyright laws, this manual may not
be duplicated in whole or in part without the written consent of
Digidesign.
DIGIDESIGN, AVID and PRO TOOLS are trademarks or
registered trademarks of Digidesign and/or Avid Technology,
Inc. All other trademarks are the property of their respective
owners.
All features and specifications subject to change without
notice.
PN 932708328-00 REV A 01/01
Communications & Safety Regulation Information
Compliance Statement
Control 24 complies with the following standards regulating
interference and EMC:
• FCC Part 15 Class A
• EN55103 – 1, environment E4
• EN55103 – 2, environment E4
• AS/NZS 3548 Class A
• CISPR 22 Class A
• ICES-003 Class A
Canadian Compliance Statement:
This Class A digital apparatus complies with Canadian ICES-
003
Cet appareil numérique de la classe A est conforme à la norme
NMB-003 du Canada
CE Compliance Statement:
Digidesign is authorized to apply the CE (Conformité
Europénne) mark on this compliant equipment thereby
declaring conformity to EMC Directive 89/336/EEC and Low
Voltage Directive 73/23/EEC.
Australian Compliance:
FCC Statement:
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules.
Communications Statement
This equipment has been tested to comply with the limits for a
Class A digital device. Changes or modifications to this product
not authorized by Focusrite or Digidesign, Inc., could void the
Certification and negate your authority to operate the product.
This product was tested for CISPR compliance under
conditions that included the use of peripheral devices and
shielded cables and connectors between system components.
Digidesign and Focusrite recommend the use of shielded
cables and connectors between system components to reduce
the possibility of causing interference to radios, television
sets, and other electronic devices.
Safety Statement:
This equipment has been tested to comply with
EN60065:1993 including Amendment A11:1997
IEC 65:1985 amendment A1:1985, A2:1989 & A3:1992
UL 6500 1st edition: 1996
CAN/CSA-E65-94.