Muting Sends - DigiDesign Control 24 Reference Manual

To display pre- or post-fader status for a send:
Press the master PRE/POST switch. The chan-
nel's scribble strip will display "Pre" or "Post" for
as long as the button is pressed.
In Send Flip mode, the encoder switch LED
will be lit to specify sends in a pre-fader con-
figuration.
Only those channels with send destinations as-
signed will display this info. Other scribble
strips will remain blank.
You can exit Flip mode at any time and return to
normal operation by pressing the flashing FLIP
switch. This action will return Control 24 to the
state it was in prior to entering Flip. The FLIP
switch LED will extinguish when the mode is
exited.
Pro Tools preferences for Send Mute and
send level follows mix groups.

Muting Sends

To mute a send in the Fader section:
Make sure the appropriate channels are
1
banked into view on Control 24.
Select the send to be muted by pressing the
2
corresponding master SEND button (A/F-E/J) in
the SENDS section.
Press the SEND MUTE button. Its LED will
3
light, indicating that you are in Send Mute
mode.
Press a channel's encoder button on a channel
4
to mute the selected send on that channel.
Pre/Post Fader Send Status
To set pre/post send status from the Fader
section:
Make sure playback is stopped.
1
Make sure Control 24 is not in channel AS-
2
SIGN mode (the ASSIGN button's LED should be
off).
Select a send by pressing a master SEND but-
3
ton (A/F-E/J).
Press the global PRE/POST button.
4
Press a channel encoder button to toggle the
5
send between pre- and post-fader. The encoder
button LED will light when the send is pre-fader.
Shortcuts
To toggle a send between pre- and post-fader
status for all channels:
Follow steps 1 through 4 above.
1
While pressing APPLY TO ALL CHANNELS or
2
OPT(ALT)/ALL, press any channel's encoder but-
ton.
To toggle a send between pre- and post-fader
status for all selected channels:
Follow steps 1 through 4 above.
1
While pressing APPLY TO ALL SELECTED
2
CHANNELS or SHIFT/ADD+OPT(ALT)/ALL,
press any channel's encoder button.
Chapter 11: Mixing 109