Vecow ECS-9240-GTX1050T User Manual page 20

2.2.6 DVI-I Connector
SIM 2
1
WLAN
RST
The DVI-I connector on the front panel supports both DVI and VGA display
modes. This connector can output DVI signals. The DVI output mode supports
up to 1920x1200 resolution. The DVI mode is automatically selected according
to the connected display and you will need a DVI-I cable when connecting to a
display device. The VGA output mode supports up to 1920x1200 resolution. If
using VGA function, you will need a DVI-I to VGA module connected to DVI-I
device. Below is the DVI-I to VGA dongle image:
2.2.7 DisplayPort
SIM 2
1
WLAN
RST
Onboard Display Port supports auxiliary channel dual mode and the connection
supports up to 4096 x 2304 resolution at 60 Hz.
Multi-Stream Transport Display Resolutions Table as follows:
SIM 3
2 3
SIM 1
CFast
SIM 3
2 3
SIM 1
CFast
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050
DVI-D
DP
DVI-I
DVI-D
DP
DVI-I
LAN 1
LAN 2
LAN 1
LAN 2
13