Vecow ECS-9240-GTX1050T User Manual page 96

DIO1 / DIO2 group:
Isolate check button:
DIO type of DIO configuration, isolated / non-isolated, defined in ECS-9000
series user manual.
Read button:
Set DIO configuration to get DI / DIO input state.
DO type check button:
User setting, DO type of DIO configuration to setup 8 pins - Source / Sink.
Use for Write (DO) button activate.
Write button:
Set DIO configuration to set DO / DIO output state.
DI preference text:
User setting, DI type of DIO configuration by hexadecimal bitmask - Source
/ Sink.
Use for Read (DI) button activate.
DO / DIO output text:
User setting, DO / DIO output state by hexadecimal bitmask - on / off.
Use for Write button activate.
DO / DIO writable text:
User setting, DO / DIO writable of DIO configuration by hexadecimal
bitmask - yes / no.
Use for Read (DIO) / Write button activate.
DI / DIO input text (read only):
DI / DIO input state by hexadecimal bitmask – on /off.
Use for Read button activate.
DO / DIO text (read only):
DO / DIO output state with input state (DIO) and configuration.
Use for Write button activate.
DO / DIO output text (read only):
DO / DIO output state with configuration.
Use for Write button activate.
DI type pin texts (pin 8 ~ pin 1):
User setting, DI pin type of DIO configuration - Source / Sink.
DI / DIO input pin texts (read only, pin 8 ~ pin 1 / pin 18 ~ pin 11, pin 8 ~ pin 1):
DI / DIO input pin state
Use for Read button activate.
DO / DIO output pin texts (pin 18 ~ pin 11 / pin 18 ~ pin 11, pin 8 ~ pin 1):
User setting, DO / DIO output pin state
Use for Write button activate.
DO / DIO pin writable texts (pin 18 ~ pin 11 / pin 18 ~ pin 11, pin 8 ~ pin 1):
User setting, DO / DIO pin writable of DIO configuration.
Use for Read (DIO) / Write button activate.
WDT group:
Write button:
Set WDT when WDT setup text is valid.
Stop button:
Cancel WDT and counting.
Use after Write button action.
Appendix B
89