Pin No.
10/ 100Mbps
1
E_TX+
2
E_TX-
3
E_RX+
4
----
Each LAN port is supported by standard RJ-45 connector with LED indicators to
present Active/ Link/ Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the
cable is properly connected to a 100 Mbps Ethernet network, and it lightens
in solid orange when the cable is properly connected to a 1000Mbps Ethernet
network. The left LED will keep twinkling/ off when Ethernet data packets are
being transmitted or received.
10Mbps
Right
Off
Bottom Led
Left
Flash
Bottom Led
Yellow
2.2.10 Audio Jack
SIM 2
1
WLAN
RST
There are 2 audio connectors, Mic-in and Line-out, in the front side of ECS-
9200/9100 GTX1050. Onboard Realtek ALC892 audio codec supports 5.1
channel HD audio and fully complies with Intel High Definition Audio (Azalia)
specifications. To utilize the audio function in Windows platform, you need to
install the corresponding drivers for both Intel C236 chipset and Realtek ALC892
codec.
1000Mbps
MDI0_P
MDI0_N
MDI1_P
MDI2_P
100Mbps
Solid
Green
Flash
Yellow
SIM 3
2
3
SIM 1
CFast
GETTING TO KNOW YOUR ECS-9200/9100 GTX1050
Pin No.
10/ 100Mbps
5
-----
6
E_RX-
7
-----
8
------
1000Mbps
Solid
Orange
Flash
Yellow
DVI-D
DP
DVI-I
1000Mbps
MDI2_N
MDI1_N
MDI3_P
MDI3_N
1
8
LAN 1
LAN 2
15