d&b audiotechnik 10D Manual page 90

Id Display text
46 Amp. firmware is too
old
50 Invalid device para
51 Invalid DSP prog %u
52 DSP boot error
58 DSP comm. error
59 Invalid setup data
61 Invalid AP slot %d
78 Amp. supply fault
79 Amp. firmware
mismatch
87 Amp temp. mute
89 Amp. protection
95 Amp. overtemp %dÂ
°C
96 Amp. temp sensor
fault
99 Amp. temp warn
%d°C
120 CAN open error
121 CAN error
90
Eventlog text Description
Amp. firmware Amp firmware version
version %4.2d is too is older than required
old, required is
%4.2d
Channel '%c': invalid Invalid device
device parameters parameters
(device ident %d)
Channel '%c' : invalid DSP program invalid
DSP program %d
Channel '%c': DSP DSP boot error
boot error (DSP
program %d)
Channel '%c': DSP DSP communication
communication error fault
Channel '%c': invalid DSP invalid setup
speaker setup data
(speaker id %d, no.
%d, err %d)
Channel '%c': invalid Invalid
AP slot %d (file ArrayProcessing data
version %d)
Amp. supply fault Amp rail voltages
(status %04X, err
%04X, %4.1dV,
%4.1dV)
Amp. firmware V%d. Amp has wrong
%02d.%02d not firmware
suitable for hardware
ident %d
Channel '%c': Amp. Amp mute due to
temperature auto high temperature
shutdown (%d°C)
Channel '%c': Amp. Amp channel
protection (power protection
%uW)
Channel '%c': Amp. Amp over
overtemperature %d temperature
°C (power %uW)
Amp. temperature Amp temperature
sensor fault (A %d sensor fault
°C, B %d°C, C
%d°C, D %d°C)
Channel '%c': Amp. Amp temperature
temperature warning warning
%d°C (power
%uW)
Could not open CAN CAN interface open
interface (error %d) error
CAN error %d CAN error
(remote flags %02X,
dbCan flags %02X)
Location Possible reasons
Amp Amp software error.
DSP Software error or
wrong device type
detected.
DSP Software error.
DSP DSP or software
error.
DSP DSP defect or
software error.
DSP Software error.
(External: AP data file Software error.
invalid)
Amp Amp defect.
Amp Amp firmware does
not support the Amp
hardware.
Amp Poor cooling.
Amp cabling or Amp
defect.
Amp Poor cooling.
Amp Amp defect.
Amp Poor cooling.
DSP DSP defect or
software error.
(External: CAN CAN cabling or
cabling), RemId multiple RemIds.
d&b 10D/30D Manual 1.10 en