d&b audiotechnik 10D Manual page 35

d&b 10D/30D Manual 1.10 en
Speaker
1. On the bottom left of the «Output» tab, select the «Speaker»
navigation button to enter the Speaker setup subscreen.
2. Choose the desired speaker setups for all channels and
confirm each selected setup by clicking the «OK» button right
next to the «Speaker» selection field.
3. Define the LoadMatch settings, if applicable and desired,
correspondingly.
4. After defining all settings, exit the subscreen by clicking the
Home button ( ).
Note: A detailed description of the Speaker setup and
LoadMatch settings is given in the reference chapter
Þ Chapter 13.8. "Speaker" on page 70.
4. Remote
1. On the Home screen, click the Device view button to enter the
Device setup menu.
2. Click the «Remote» tab and define your desired Remote
settings correspondingly.
Note: A detailed description of the remote settings is given in
the reference chapter Þ Chapter 12.4. "Remote"
on page 49.
As all the configurations and settings mentioned above can
also be defined remotely, it depends on how you wish to
proceed whether defining the Remote settings is the last or the
first step when configuring your basic settings.
After defining all settings, exit the subscreen by clicking the Home
button ( ) and carry on with the individual channel settings.
5. Channel setup
1. On the Home screen, click the Channel view button of the first
channel (A) or pair of channels (A/B) to enter the Channel
setup.
2. Define your individual channel settings such as CUT, HFA,
CPL, Level, DLY or EQ for all channels correspondingly.
3. After defining all settings, exit the subscreen by clicking the
Home button ( ).
Note: A detailed description of the Input routing is given in
the reference chapter Þ Chapter 13.6. "Input routing"
on page 66.
A detailed description of the Input mode is given in the
reference chapter Þ Chapter 12.2. "Input" on page 38.
35