d&b audiotechnik 10D Manual page 65

Type Param. 1
PEQ FRQ
(Parametric EQ)
Notch FRQ
HiShlv FRQ
LoShlv FRQ
Asym FRQ 1
(Asymmetric filter)
d&b 10D/30D Manual 1.10 en
Param. 2 Param. 3
Q (and Gain
corresponding
bandwidth - BW)
Q (and
corresponding
bandwidth - BW)
Slope Gain
Slope Gain
Slope 1 Gain
Param. 4 Param. 5
FRQ 2 Slope 2
Parameter ranges and resolutions:
Type The available filter types.
FRQ
Filter frequency (center/corner frequency),
adjustable from 20 Hz to 20 kHz.
On the top right of the «Frequency/FRQ» input
field, the increment is displayed as an octave
value. When you click the field for the first
time, the frequency increment is set to 1/6
octave. When you click the field again, you
can toggle between 1/6 and 1/96 octave
increments.
To confirm the set frequency, click the input
field again.
Q Q of the filter, adjustable from 0.5 ... 25 in
10 % steps.
BW
In addition, the resulting bandwidth (BW) is
displayed as a value (2.0 ... 0.04 octaves) in
a non-editable Information field below the Q
Input field.
Slope
Slope can be set to 6, 12, 18 or
24 dB/octave.
Gain
Gain, adjustable from –18 dB to +12 dB in
0.2 dB steps.
Clear
Resets all settings of the selected filter band
band right away.
No. of filters
1
1
2
2
4
65