View The Remaining Power Module Charge - Emerson AMS Trex User Manual

Figure 2-9:
A.
B.
C.
2.6.4

View the remaining power module charge

You can check the remaining power module charge from several places.
Procedure
1.
2.
Related information
User Guide
LEDs showing approximately 100 percent charge
AC adapter LED. Lights up when the AC adapter is attached to the power module. A green light
indicates the power module is fully charged. An orange light indicates the power module is
charging. No LED indicates the power module is not being charged.
Power module LEDs. Each solid green LED indicates approximately 20 percent charge. A blinking
LED indicates the power module is charging within that 20 percent range.
Power module button. Press to illuminate the power module LEDs.
Check the charge from the power module.
a. Press the power module button to illuminate the 5 LEDs.
b. View the LEDs. Each solid green LED indicates approximately 20 percent charge.
Check the charge from the Trex Home screen.
a. Tap Settings or the status bar at the top of the screen.
b. Tap More > Power Management.
The charge level is displayed.
LEDs on the power module
AMS Trex Device Communicator overview
17