Shock; General Guidelines; Connection Specifications; Hart And Fieldbus Communication Terminals - Emerson 475 User Manual

A-2

Shock

General Guidelines

CONNECTION

SPECIFICATIONS
HART and Fieldbus
Communication Terminals

Connection Types

BATTERY SPECIFICATIONS

Battery Type

Connection

Charge

Passes the 1-meter drop test onto concrete
• Only use new, original parts.
• Do not recharge the battery in hazardous areas.
• Have repairs done by only qualified personnel.
• Charge or power using only the Field Communicator power supply/charger.
Three 4mm banana plugs (one common terminal to both HART and F
fieldbus.)
IrDA Port
± 15 degrees recommended maximum angle between the 475 interface and adapter
or PC.
18 in. recommended maximum distance between the 475 interface and adapter or PC.
Bluetooth Interface
The Bluetooth Interface is a licensed option for the 475 Field Communicator. If your
475 is not licensed for Bluetooth, it does not have a Bluetooth radio.To use Bluetooth
you need an approved adapter using the Windows Bluetooth software and drivers
included with Windows XP Professional Service Pack 2 or 3 or Windows Vista
Business Service Pack 1. The adapter should be plug-and-play if no other Bluetooth
software or drivers were installed on your PC. The Easy Upgrade Utility cannot
communicate with an adapter using third-party drivers. See
www.fieldcommunicator.com or the readme file for more information.
30 feet (10 meters) recommended maximum distance between the 475 and a
Bluetooth adapter attached to a PC.
Card Reader
Only supported card readers can be used with the System Card. Unsupported card
readers may corrupt files. See the readme file on your Resource CD or
www.fieldcommunicator.com for the list of supported card readers.
The card reader can be used only with the Field Communicator Easy Upgrade Utility.
Two rechargeable Li-Ion cells, not serviceable
Green six-pin mini din (female) jack on the side of the battery
+50°F to +104°F (10°C to +40°C)
Guidelines for the Li-Ion Battery (Power Module)
• Do not recharge the battery in hazardous areas. The power supply/charger is not
IS-approved.
• Charge or power using only the Field Communicator power supply/charger.
• Recharge the battery frequently, preferably after each use. Limit full discharges, if
possible.
OUNDATION