Enter A Name For The Trex Unit; View The Application Version Number; Set The Time And Date - Emerson AMS Trex User Manual

Procedure
1.
2.
3.
2.10.6

Enter a name for the Trex unit

You can enter a name to uniquely identify the Trex unit. This is helpful if you have multiple
Trex units at your site. By default, the Trex unit is named "TrexXXXXXXXXXXXX" where the
Xs are the serial number. This name is displayed in applications like Upgrade Studio.
Procedure
1.
2.
3.
4.
5.
2.10.7

View the application version number

You can view the version numbers for all the installed applications.
Procedure
1.
2.
3.
2.10.8

Set the time and date

Note
When you connect the Trex unit to a PC or a wireless network, the Trex unit updates to use the same
time as the PC or wireless network.
Procedure
1.
2.
3.
User Guide
Tap Settings or the status bar at the top of the screen.
Tap More > About.
Tap OK.
Tap Settings or the status bar at the top of the screen.
Tap More > About.
Tap Name.
Enter a new name up to 20 characters.
Tap OK.
Tap Settings or the status bar at the top of the screen.
Tap More > Installed Applications.
The version numbers for all installed applications are displayed.
Tap Back to close the screen.
Tap Settings or the status bar at the top of the screen.
Tap More > Date & Time.
Edit the following options as needed.
AMS Trex Device Communicator overview
31