AMS Trex Device Communicator overview
Note
The Trex unit cannot connect to a wireless network that requires you to enter log in information on a
website.
Icon
Individual wireless networks in-range, or previously connected, will appear on the Wireless
Networks screen. You can view the network SSID, security, profile (whether network
configuration has been saved for future use), signal strength, and current connection
status.
You can disconnect from a wireless network by sliding Wireless Networks to off,
connecting to another network, or choosing Forget on a connected Wireless network.
Related information
Enable or disable wireless communication
1.
2.
3.
Connect the Trex unit to a broadcasting wireless network
Note
The Trex unit cannot connect to a wireless network that requires you to enter log in information on a
website.
Procedure
1.
2.
28
Meaning
(status bar only) Wireless is turned on, but the Trex unit is not
connected to a network.
Wireless is enabled and the Trex unit is connected to a network with a
strong signal. The icon changes based on the signal strength.
Wireless network requires authentication to connect.
The currently connected network
Enable or disable wireless communication
Connect the Trex unit to a broadcasting wireless network
Connect the Trex unit to a non-broadcasting wireless network
Enter a network address for an AMS Trex unit
Forget a wireless network
Tap Settings or the status bar at the top of the screen.
Tap Wi-Fi.
Tap the Wireless Networks option to enable or disable wireless.
Tap Settings or the status bar at the top of the screen.
Tap Wi-Fi.
User Guide