Emerson AMS Trex User Manual page 95

Note
The selected tag is not retained the next time you connect to the device. You need to select the
desired tag each time you connect the device.
If you want to change the value of the HART tag, see the device documentation for more
information. The location of these tag parameters varies because it is determined by the
device manufacturer.
Procedure
1.
2.
3.
User Guide
Connect to the HART device.
Tap the tag that is displayed on the top of the screen.
Figure 3-33: Tap the device tag
Select Tag or Long Tag.
Field Communicator application
87