Emerson AMS Trex User Manual page 57

•
Figure 3-1:
Note
To switch between HART communication and FOUNDATION fieldbus communication, you must exit
and restart the Field Communicator application. After the HART or Fieldbus Device Lists are
displayed, the HART or Fieldbus buttons disappear until you restart the application.
Option
Power Status
Communication Status
User Guide
Tap HART Offline or Fieldbus Offline to simulate a device.
Connect - Select screen
Description
Detect voltage on the lead set.
Detect if a connected device is communicating with the Trex
unit.
Field Communicator application
49