Transferring Log Files To A Pc - Emerson AMS Trex User Manual

serial number is located on the bottom of the Trex unit, but you can also access the serial
number by connecting the Trex unit to Upgrade Studio and then hovering the cursor over
the Trex unit icon.
Procedure
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
2.15

Transferring log files to a PC

When you install Upgrade Studio, the Trex File Transfer Utility is also installed. This
application lets you transfer log files from the Fieldbus Diagnostics application or ValveLink
Mobile to a PC. Use the USB cable to connect the Trex unit to the PC where the application
installed. See the Help included with Upgrade Studio for more information.
User Guide
Connect the Trex unit to the PC where Upgrade Studio is installed.
In Upgrade Studio, click Activate Units.
Click the connected Trex unit that is displayed on the left side of the screen.
Enter or copy/paste the activation code you received.
Click Activate.
A message confirms the activation was successful.
Click More > Export.
Under Trex Synchronization Files, click Show Details.
Select one or more Trex synchronization files to export.
Click Export.
Select a location to save the Trex synchronization file, and click OK.
If you are not using the air-gap deployment, email the exported Trex
synchronization file to Emerson at WWCS.CustServ@emerson.com.
If you are using the air-gap deployment, do the following:
a. Open Upgrade Studio on the PC that has an internet connection.
b. Transfer the Trex synchronization file to that PC.
c. Click More > Import Package.
d. Browse to the location that has the Trex synchronization file, and click OK.
e. Click Import.
f. Click OK.
g. Log in with your username and password. Upgrade Studio uploads the Trex
synchronization file.
AMS Trex Device Communicator overview
43