Accessories; Cables And Lead Sets - Emerson AMS Trex User Manual

AMS Trex Device Communicator overview
•
•
2.7

Accessories

The Trex unit includes the following accessories:
•
•
•
•
•
2.7.1

Cables and lead sets

The Trex unit comes with a lead set so it can connect to a device. The lead set attaches to
one set of terminals on the top of the Trex unit. The positive lead is marked with a red band
near the banana jacks.
Note
When you remove the lead set from the Trex unit, do not pull on the cable. Grab the plug/connectors
and remove the lead set from the terminals.
The Trex unit may also include the FOUNDATION fieldbus Power Plug, which is used to
power one FOUNDATION fieldbus device. Use the FOUNDATION fieldbus Power Plug with
the Device Communicator Plus communication module. The plug attaches to the FF pwr
terminal and the positive FF terminal on top of the lead set.
Figure 2-11:
20
Use a dry location at or near room temperature when storing the power module for
an extended time. Prolonged storage at higher temperatures can reduce
performance.
Ensure the remaining charge level is at or near mid-capacity when storing for an
extended time. The remaining charge will slowly drain during storage. Periodically
charge the power module to ensure the remaining charge does not drain to low
levels.
Lead set.
A FOUNDATION fieldbus Power Plug to enable the Trex unit to power a
FOUNDATION fieldbus device.
A USB cable to connect the Trex unit to PC applications.
AC adapter.
A handstrap that can be connected to either side of the Trex unit.
FOUNDATION fieldbus Power Plug
User Guide