Figure 47: Levelmaster Application Setup Tab; Figure 48: Levelmaster Application Communications Tab - ABB LevelMaster 7100 User Manual

7. Select the Communications tab (Figure 48). For the purpose of these instructions, it is assumed that COM2 will be used.
8. Type "COM2:" in the serial port field.
9. Click Send. This will assign COM port 2 to the LevelMaster.
IMPORTANT NOTE: Based on the configuration files that were loaded onto the board, the remaining field default
values should be sufficient to begin operation.

Figure 47: LevelMaster application Setup tab

Figure 48: LevelMaster application Communications tab

LevelMaster 7100 User manual 2105835 Rev AA | 53