Table of Contents
Advertisement
5.
Scroll back up to navigate to Section Heights, select the value field and type the height in inches for every section defined.
6.
Scroll down to navigate to Factors Per Section and type the factor for each section defined.
7.
Click Send to save the configuration.
8.
On the navigation tree, click LevelMaster.
9.
Verify the volume calculations are displayed.
10. After all calibration is complete and verified, save the controller configuration as described in section 6.7, Save the
configuration.
LevelMaster 7100 User manual 2105835 Rev AA | 64
Figure 57: Configuring the strapping table
Advertisement
Table of Contents
Troubleshooting
