Table of Contents
Advertisement
SEARCH CHANNELS (CHANNEL SEARCH)
Press the
button. You will be asked whether you wish to save the changes or not. Use the
buttons to make the selection and confi rm with the
the newly found channels will be added to the end of the channel list. Then press the
exit the menu. The channel list is called up on to the TV screen by pressing the
section "On-Screen Displays" "Channel List TV/Radio").
After a search (of whatever type) the receiver shows all newly found channels in
the channel list under the heading "New Channels". You will fi nd this heading in
the channel list at the end of the green overall list (select using the
MANUAL (CHANNEL) SEARCH
The
buttons allow you to select different sets of parameters for the search.
Frequency (channel)
Using the
buttons or the keypad, select the frequency (channel) to be searched. At the
bottom right of the screen display, the receiver shows the current signal strength and signal quality
of the selected frequency (channel). Press the
Band Width
Use the
buttons to select the correct bandwidth. At the bottom right of the screen display,
the receiver shows the current signal strength and signal quality for your selection.
button. If you select "Yes, save changes",
button to move to the next selection item.
button to
button (see also
buttons).
43
Advertisement
Table of Contents
