Controls, Displays And Connections - Kathrein UFT 676sw Operating Manual

CONTROLS, DISPLAYS AND CONNECTIONS

This section provides a brief description of all the controls, displays and connections.
VIEW OF FRONT PANEL (FLAP REMOVED)
VIEW OF REAR PANEL
Front panel controls and displays
1)
1. On/Off switch
2. Channel select buttons (▼▲)
3. Display
The serial number sticker for the UFT 676sw is located on
the underside of the unit.
The information printed on it includes the following:
- the exact designation (e.g. UFT 676sw)
- the part number and
- the serial number of the unit.
You do not need this information in order to operate the
unit. If however, contrary to expectations, you need to
make a claim under warranty and you do not have the
packaging for the receiver to hand, you can fi nd the
above information about the unit on this sticker.
1
) The unit is not fully disconnected from the mains (see the sections "Safety Instructions - Important Instructions" and "Periods of
extended absence, thunderstorms, mains socket accessibility")
10
Rear panel controls and displays
1. RJ 11 data interface/connection
port for an external IR sensor
2. VHF/UHF input socket
3. VHF/UHF loop-through output
4. Scart socket for VCR/AUX connection
5. Video output (composite colour)
6. Electrical digital data stream output
(SPDIF/Sony Philips Digital Interface
Format) for Dolby Digital AC 3 audio
7. Audio outputs (L/R) cinch sockets
8. HDMI Output
9. Scart socket for TV connection
10. Mains power cable