Recording (Timer) - Kathrein UFT 676sw Operating Manual

EPG - ELECTRONIC PROGRAMME GUIDE

RECORDING (TIMER)

The (red dot) button allows you to set up a programme at any time for recording on an external
recorder. The programme to be recorded can be selected in any of the EPG views, provided
the (red dot) button appears at the bottom of the screen display.
Programme appears in EPG:
Select the desired programme and press the
example picture below):
If the programme does not appear on the EPG:
Select any programme on the channel on which the desired programme is to be transmitted at a later
time and press the
must be input manually).
Remember
programme
external
in accordance with
the recording
programmed in the
receiver.
Use the buttons to select the desired recording mode. The following recording mode options are
available:
once: The recording will be performed once
-
daily: The recording will be performed daily at a time specifi ed by you
-
weekly: The recording will be performed once a week on the same day and at the same time
-
Use the cursor buttons (
When all settings have been made, press the
scheduled recordings in the plan recording view of the EPG (see "Plan recording" chapter).
30
(red dot) button (starting and fi nishing times together with the recording date
to
your
recorder
list
) to select the further items and use the keypad to complete the settings.
(red dot) button. The following display appears (see
button to save the recording settings. You can view the